Free alligator SVG

Alligator head SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Alligator head, as a solid black shape
Alligator head. The preview is the SVG file itself.

An alligator head in profile with the mouth shut: a slit eye under a bony ridge, a nostril at the tip and a zigzag line of interlocking teeth. A few scales are cut in behind the jaw.

What is in the file

Size100 × 53 mm (3.94 × 2.07 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut10: 1 outer edge and 9 cut-outs
Cut length669 mm at this size
Narrowest part1.3 mm at this size
Nodes203 curve and line segments
Also found asGator head SVG

Measured from the file. PNG: 2,000 × 1,087 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.53 in (25 × 13 mm)0.33 mm170 mm160Too fine for most machines
2 × 1.05 in (51 × 27 mm)0.66 mm340 mm45Fine detail: vinyl and paper only, weed with care
3 × 1.58 in (76 × 40 mm)0.99 mm510 mm18Fine detail: vinyl and paper only, weed with care
4 × 2.1 in (102 × 53 mm)1.3 mm680 mm10Vinyl, card and thin sheet
6 × 3.15 in (152 × 80 mm)2 mm1,020 mm3Vinyl, card and thin sheet
8 × 4.2 in (203 × 107 mm)2.6 mm1,359 mm2Vinyl, card and thin sheet
12 × 6.3 in (305 × 160 mm)4 mm2,039 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More alligator SVG files

← Tribal alligator All 12 alligators Alligator mouth open wide →