Free alligator SVG

Alligator lurking in the swamp SVG

Alligator lurking in the swamp, as a solid black shape — Alligator lurking in the swamp. The preview is the SVG file itself.

Only what shows above the water: the tip of the snout, an eye ridge and a line of scutes, with cattails at one end and ripples cut along the surface. One piece, joined along the water.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 48 mm (3.94 × 1.89 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	8: 1 outer edge and 7 cut-outs
Cut length	581 mm at this size
Narrowest part	1.8 mm at this size
Nodes	227 curve and line segments

Measured from the file. PNG: 2,000 × 1,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.48 in (25 × 12 mm)	0.46 mm	148 mm	170	Too fine for most machines
2 × 0.96 in (51 × 24 mm)	0.91 mm	295 mm	50	Fine detail: vinyl and paper only, weed with care
3 × 1.44 in (76 × 37 mm)	1.4 mm	443 mm	21	Vinyl, card and thin sheet
4 × 1.92 in (102 × 49 mm)	1.8 mm	590 mm	10	Vinyl, card and thin sheet
6 × 2.88 in (152 × 73 mm)	2.7 mm	885 mm	3	Vinyl, card and thin sheet
8 × 3.84 in (203 × 98 mm)	3.7 mm	1,181 mm	3	Any material, including 3 mm wood and acrylic
12 × 5.76 in (305 × 146 mm)	5.5 mm	1,771 mm	2	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More alligator SVG files

← Alligator standing and waving All 12 alligators Alligator monogram frame →