Free alien SVG

Alien peeking over a ledge SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Alien peeking over a ledge, as a solid black shape
Alien peeking over a ledge. The preview is the SVG file itself.

The friendly face from the eyes up, looking over a straight ledge with three fingers of each hand hooked over it. Put the ledge along the top of a monitor, a shelf, a car window or the edge of a card.

What is in the file

Size100 × 81 mm (3.94 × 3.18 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut9: 1 outer edge and 8 cut-outs
Cut length719 mm at this size
Narrowest part1.4 mm at this size
Nodes194 curve and line segments
SymmetryMirror

Measured from the file. PNG: 2,000 × 1,629 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.81 in (25 × 20 mm)0.36 mm183 mm120Too fine for most machines
2 × 1.61 in (51 × 41 mm)0.71 mm365 mm30Fine detail: vinyl and paper only, weed with care
3 × 2.42 in (76 × 61 mm)1.1 mm548 mm12Vinyl, card and thin sheet
4 × 3.23 in (102 × 82 mm)1.4 mm731 mm6Vinyl, card and thin sheet
6 × 4.84 in (152 × 123 mm)2.1 mm1,096 mm2Vinyl, card and thin sheet
8 × 6.46 in (203 × 164 mm)2.8 mm1,461 mm1Vinyl, card and thin sheet
12 × 9.68 in (305 × 246 mm)4.3 mm2,192 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More alien SVG files

← Three little aliens in a row All 14 aliens Alien saucer and planet badge →