Free alien SVG

Alien saucer and planet badge SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Alien saucer and planet badge. The preview is the SVG file itself.

A round badge with a scene cut out of it: a ringed planet, a small saucer with its beam, four sparkles and four stars, inside a fine border in four arcs. One piece: back it with a bright colour.

What is in the file

Size	100 × 100 mm (3.94 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	16: 1 outer edge and 15 cut-outs
Cut length	1,363 mm at this size
Narrowest part	2.2 mm at this size
Nodes	128 curve and line segments

Measured from the file. PNG: 2,000 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 1 in (25 × 25 mm)	0.56 mm	346 mm	100	Fine detail: vinyl and paper only, weed with care
2 × 2 in (51 × 51 mm)	1.1 mm	692 mm	25	Vinyl, card and thin sheet
3 × 3 in (76 × 76 mm)	1.7 mm	1,039 mm	9	Vinyl, card and thin sheet
4 × 4 in (102 × 102 mm)	2.2 mm	1,385 mm	4	Vinyl, card and thin sheet
6 × 6 in (152 × 152 mm)	3.4 mm	2,077 mm	1	Any material, including 3 mm wood and acrylic
8 × 8 in (203 × 203 mm)	4.5 mm	2,770 mm	1	Any material, including 3 mm wood and acrylic
12 × 12 in (305 × 305 mm)	6.7 mm	4,154 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More alien SVG files

← Alien peeking over a ledge All 14 aliens Alien saucer with a beam frame →