Alien head with slanted eyes SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
The long-chinned head of every sighting report: a broad dome that narrows to a small chin, two big slanted eyes with a glint at the outer corner, two nostrils and a short mouth. One piece, with the eyes as windows.
What is in the file
| Size | 77 × 100 mm (3.04 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 6: 1 outer edge and 5 cut-outs |
| Cut length | 460 mm at this size |
| Narrowest part | Nothing narrower than 6 mm at this size |
| Nodes | 43 curve and line segments |
| Symmetry | Mirror |
Measured from the file. PNG: 1,562 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.77 × 1 in (20 × 25 mm) | Over 1.5 mm | 117 mm | 120 | Vinyl, card and thin sheet |
| 1.54 × 2 in (39 × 51 mm) | Over 3 mm | 234 mm | 30 | Any material, including 3 mm wood and acrylic |
| 2.32 × 3 in (59 × 76 mm) | Over 4.6 mm | 351 mm | 12 | Any material, including 3 mm wood and acrylic |
| 3.09 × 4 in (78 × 102 mm) | Over 6.1 mm | 467 mm | 6 | Any material, including 3 mm wood and acrylic |
| 4.63 × 6 in (118 × 152 mm) | Over 9.1 mm | 701 mm | 2 | Any material, including 3 mm wood and acrylic |
| 6.18 × 8 in (157 × 203 mm) | Over 12 mm | 935 mm | 1 | Any material, including 3 mm wood and acrylic |
| 9.26 × 12 in (235 × 305 mm) | Over 18 mm | 1,402 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More alien SVG files
-
Friendly alien face with antennae Solid · one piece -
Cute alien waving Solid · one piece -
Alien silhouette, standing Solid · one piece -
Alien UFO with a beam of light Solid · one piece -
Alien spaceship with a pilot Solid · one piece -
Alien saucer beaming up a cow Solid · one piece -
Alien giving a peace sign Solid · one piece -
Three little aliens in a row Solid · one piece
← Layered alien face in four colours All 14 aliens Friendly alien face with antennae →