Free alien SVG

Three little aliens in a row SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Three little aliens in a row, as a solid black shape
Three little aliens in a row. The preview is the SVG file itself.

Three small aliens standing together on a strip of ground: one with a single eye and one antenna, a taller one waving in the middle and one with three eyes. Their hands overlap, so the group is one piece.

What is in the file

Size100 × 85 mm (3.94 × 3.34 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut24: 1 outer edge and 23 cut-outs
Cut length1,345 mm at this size
Narrowest part1.7 mm at this size
Nodes658 curve and line segments

Measured from the file. PNG: 2,000 × 1,708 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.85 in (25 × 22 mm)0.43 mm342 mm110Too fine for most machines
2 × 1.7 in (51 × 43 mm)0.86 mm683 mm30Fine detail: vinyl and paper only, weed with care
3 × 2.54 in (76 × 65 mm)1.3 mm1,025 mm12Vinyl, card and thin sheet
4 × 3.39 in (102 × 86 mm)1.7 mm1,367 mm6Vinyl, card and thin sheet
6 × 5.09 in (152 × 129 mm)2.6 mm2,050 mm2Vinyl, card and thin sheet
8 × 6.78 in (203 × 172 mm)3.5 mm2,733 mm1Any material, including 3 mm wood and acrylic
12 × 10.18 in (305 × 258 mm)5.2 mm4,100 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More alien SVG files

← Alien giving a peace sign All 14 aliens Alien peeking over a ledge →