Free alien SVG

Alien head outline SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Alien head outline, drawn as a line
Alien head outline. The preview is the SVG file itself.

The long-chinned head as one even line, with the two slanted eyes solid and joined to the line at their outer corners. One piece, for colouring pages, foil and pen plotters.

What is in the file

Size77 × 100 mm (3.04 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut2: 1 outer edge and 1 cut-out
Cut length654 mm at this size
Narrowest part2.6 mm at this size
Nodes46 curve and line segments
SymmetryMirror

Measured from the file. PNG: 1,562 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.77 × 1 in (20 × 25 mm)0.66 mm166 mm120Fine detail: vinyl and paper only, weed with care
1.54 × 2 in (39 × 51 mm)1.3 mm332 mm30Vinyl, card and thin sheet
2.32 × 3 in (59 × 76 mm)2 mm498 mm12Vinyl, card and thin sheet
3.09 × 4 in (78 × 102 mm)2.6 mm664 mm6Vinyl, card and thin sheet
4.63 × 6 in (118 × 152 mm)4 mm997 mm2Any material, including 3 mm wood and acrylic
6.18 × 8 in (157 × 203 mm)5.3 mm1,329 mm1Any material, including 3 mm wood and acrylic
9.26 × 12 in (235 × 305 mm)7.9 mm1,993 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More alien SVG files

← Alien saucer with a beam frame All 14 aliens Layered alien face in four colours →