Dinosaur valley shadow box SVG
A long-necked dinosaur grazing the treetops, a stegosaurus and a triceratops on the valley floor and a tyrannosaur on the ridge, with a smoking peak behind. 6 sheets of card, cut and stacked with a gap between each, make the picture. The files are free, and every part of the scene can be moved, swapped or resized below before you download.
6 sheets at 8 × 8 in, zipped, with a note on putting them together.
Free for personal and commercial use, no sign-up. What you can do with it.
The 6 sheets
Sheet 1 is the back and sheet 6 is the front. Each one is a single piece with the same frame round its edge, so they line up when stacked. The colours shown are the “Sunset” set; cut them in any card you like.
| Sheet | What is on it | Narrowest part | Seen from the front |
|---|---|---|---|
| 1. Sun | A whole sheet with holes for: Plain disc | over 2 mm | 30% |
| 2. Far peaks | A mountain range | over 2 mm | 5% |
| 3. Tyrannosaur ridge | Rolling ground, with: T. rex dinosaur silhouette and Straight palm tree silhouette | 1.3 mm | 9% |
| 4. Long-neck | Rolling ground, with: Long-neck dinosaur and Palm tree with coconuts | over 2 mm | 13% |
| 5. Valley floor | Rolling ground, with: Stegosaurus dinosaur, Triceratops dinosaur and Leaning palm tree | 1 mm | 13% |
| 6. Ferns | A gentle slope, with: 2 × Fern frond with fifteen pairs of leaflets, Bunch of grass and Grass silhouette | 0.7 mm | 26% |
Measured from the files at 8 × 8 in. The narrowest part is the thinnest neck of card that holds anything on; sharp tips are not counted. “Seen from the front” is the share of the picture that sheet fills once the sheets in front of it are in place.
Will it cut at your size?
The download is 8 × 8 in. The scene maker above makes the same scene at any of these sizes; the thinnest part scales with it.
| Frame opening | Each sheet | Narrowest part | Depth needed | Fits a 12 × 12 in mat | Rule of thumb |
|---|---|---|---|---|---|
| 6 × 6 in | 152.4 × 152.4 mm | 0.5 mm | 20 mm | Yes | Too fine: choose a larger size |
| 20 × 20 cm | 200 × 200 mm | 0.7 mm | 20 mm | Yes | Fine detail: sharp blade, slow speed |
| 8 × 8 in | 203.2 × 203.2 mm | 0.7 mm | 20 mm | Yes | Fine detail: sharp blade, slow speed |
| 23 × 23 cm | 230 × 230 mm | 0.8 mm | 20 mm | Yes | Fine detail: sharp blade, slow speed |
| 25 × 25 cm | 250 × 250 mm | 0.9 mm | 20 mm | Yes | Fine detail: sharp blade, slow speed |
Depth needed allows 3 mm of foam between sheets and 5 mm for the card itself and the backing.
Making this one
A good first shadow box to make with a child: the shapes are big and there is little fine cutting. Let them choose the dinosaurs in the maker and the colours of the card.
- Cut all 6 sheets from 160 to 220 gsm card at the same size.
- Lay them out in order, sheet 1 at the back.
- Put strips of 3 mm foam tape round the border of sheet 1 and press sheet 2 onto it with the edges level. Carry on to sheet 6.
- Fit the stack into a deep frame with the front sheet against the glass. For a light box, run a strip of warm white LEDs round the inside of the frame behind the stack.
The zip includes these steps as a text file, each sheet as its own SVG and all 6 side by side in one SVG. More on paper, frames and lights is on the shadow box page.
The parts, on their own
Everything in the scene comes from the free SVG library, where each has its own page and file:
Questions
Which dinosaurs are there?
Eight: two tyrannosaurs, a raptor, two long-necks, a triceratops, a stegosaurus and a hatchling. Open Swap on any animal and look under Animals.
Can I sell boxes I make with it?
Yes. Finished pieces are yours to sell. The files themselves may not be sold or shared; send people to this page. See the licence.
Forest deer 
Christmas village 
Haunted house 
Under the sea 
Safari sunset 
Nativity