Leaf wreath with a bow SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A leaf wreath whose leaves sweep down both sides from the top, with a bow hanging below it. The loops and tails sit clear of the ring, so the bow reads in one colour.
What is in the file
| Size | 87 × 100 mm (3.44 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 9: 1 outer edge and 8 cut-outs |
| Cut length | 1,118 mm at this size |
| Narrowest part | 2.3 mm at this size |
| Nodes | 300 curve and line segments |
| Symmetry | Mirror |
| Also found as | Christmas wreath with ribbon SVG |
Measured from the file. PNG: 1,756 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.87 × 1 in (22 × 25 mm) | 0.58 mm | 284 mm | 110 | Fine detail: vinyl and paper only, weed with care |
| 1.75 × 2 in (44 × 51 mm) | 1.2 mm | 568 mm | 30 | Vinyl, card and thin sheet |
| 2.62 × 3 in (67 × 76 mm) | 1.8 mm | 852 mm | 12 | Vinyl, card and thin sheet |
| 3.49 × 4 in (89 × 102 mm) | 2.3 mm | 1,136 mm | 6 | Vinyl, card and thin sheet |
| 5.24 × 6 in (133 × 152 mm) | 3.5 mm | 1,704 mm | 2 | Any material, including 3 mm wood and acrylic |
| 6.98 × 8 in (177 × 203 mm) | 4.7 mm | 2,272 mm | 1 | Any material, including 3 mm wood and acrylic |
| 10.48 × 12 in (266 × 305 mm) | 7 mm | 3,408 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.