Half leaf wreath for one side SVG
A crescent of leaves for the left side of a design, largest in the middle and smaller towards both ends. Flip it for the right side, or use two to bracket a name.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 48 × 100 mm (1.89 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 1 outline |
| Cut length | 594 mm at this size |
| Narrowest part | 2.9 mm at this size |
| Nodes | 153 curve and line segments |
Measured from the file. PNG: 998 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.48 × 1 in (12 × 25 mm) | 0.74 mm | 151 mm | 170 | Fine detail: vinyl and paper only, weed with care |
| 0.96 × 2 in (24 × 51 mm) | 1.5 mm | 302 mm | 50 | Vinyl, card and thin sheet |
| 1.44 × 3 in (36 × 76 mm) | 2.2 mm | 453 mm | 21 | Vinyl, card and thin sheet |
| 1.92 × 4 in (49 × 102 mm) | 2.9 mm | 604 mm | 10 | Vinyl, card and thin sheet |
| 2.87 × 6 in (73 × 152 mm) | 4.4 mm | 905 mm | 3 | Any material, including 3 mm wood and acrylic |
| 3.83 × 8 in (97 × 203 mm) | 5.9 mm | 1,207 mm | 3 | Any material, including 3 mm wood and acrylic |
| 5.75 × 12 in (146 × 305 mm) | 8.8 mm | 1,811 mm | 2 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
Eucalyptus wreath 
Berry wreath 
Olive wreath 
Floral wreath 
Wheat wreath 
Heart wreath 
Square wreath 
Star wreath 