Heart wreath SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
Leaves in pairs along a heart-shaped stem, rising from the point on both sides and getting smaller as they turn into the notch. For wedding, anniversary and Valentine designs.
What is in the file
| Size | 100 × 82 mm (3.94 × 3.23 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 9: 1 outer edge and 8 cut-outs |
| Cut length | 1,049 mm at this size |
| Narrowest part | 1.7 mm at this size |
| Nodes | 316 curve and line segments |
| Symmetry | Mirror |
Measured from the file. PNG: 2,000 × 1,654 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.82 in (25 × 21 mm) | 0.43 mm | 266 mm | 110 | Too fine for most machines |
| 2 × 1.64 in (51 × 42 mm) | 0.86 mm | 533 mm | 30 | Fine detail: vinyl and paper only, weed with care |
| 3 × 2.46 in (76 × 62 mm) | 1.3 mm | 799 mm | 12 | Vinyl, card and thin sheet |
| 4 × 3.28 in (102 × 83 mm) | 1.7 mm | 1,066 mm | 6 | Vinyl, card and thin sheet |
| 6 × 4.92 in (152 × 125 mm) | 2.6 mm | 1,599 mm | 2 | Vinyl, card and thin sheet |
| 8 × 6.56 in (203 × 167 mm) | 3.5 mm | 2,132 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 9.84 in (305 × 250 mm) | 5.2 mm | 3,197 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.