Leaf wreath outline SVG
The leaf wreath drawn as hollow leaves on a solid stem. For colouring, foil and engraving, or over the solid leaf wreath as a second layer.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 100 × 100 mm (3.94 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 34: 1 outer edge and 33 cut-outs |
| Cut length | 1,808 mm at this size |
| Narrowest part | 1.7 mm at this size |
| Nodes | 452 curve and line segments |
| Symmetry | 16-fold rotation |
Measured from the file. PNG: 2,000 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 1 in (25 × 25 mm) | 0.43 mm | 459 mm | 100 | Too fine for most machines |
| 2 × 2 in (51 × 51 mm) | 0.86 mm | 918 mm | 25 | Fine detail: vinyl and paper only, weed with care |
| 3 × 3 in (76 × 76 mm) | 1.3 mm | 1,378 mm | 9 | Vinyl, card and thin sheet |
| 4 × 4 in (102 × 102 mm) | 1.7 mm | 1,837 mm | 4 | Vinyl, card and thin sheet |
| 6 × 6 in (152 × 152 mm) | 2.6 mm | 2,755 mm | 1 | Vinyl, card and thin sheet |
| 8 × 8 in (203 × 203 mm) | 3.5 mm | 3,674 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 12 in (305 × 305 mm) | 5.2 mm | 5,511 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
Laurel wreath outline 
Leaf wreath with a bow 
Leaf wreath 
Laurel wreath 
Holly wreath with berries 
Christmas wreath with a bow 
Pine wreath 
Half wreath 