Christmas wreath with a bow SVG
A thick ring of fir tips that sweep up both sides to meet at the top, dotted with berry holes. A bow is tied at the top and its tails hang down inside the ring.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 94 × 100 mm (3.69 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 42: 1 outer edge and 41 cut-outs |
| Cut length | 1,278 mm at this size |
| Narrowest part | 2.2 mm at this size |
| Nodes | 417 curve and line segments |
| Symmetry | Mirror |
Measured from the file. PNG: 1,877 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.94 × 1 in (24 × 25 mm) | 0.56 mm | 325 mm | 100 | Fine detail: vinyl and paper only, weed with care |
| 1.87 × 2 in (48 × 51 mm) | 1.1 mm | 649 mm | 25 | Vinyl, card and thin sheet |
| 2.81 × 3 in (71 × 76 mm) | 1.7 mm | 974 mm | 12 | Vinyl, card and thin sheet |
| 3.74 × 4 in (95 × 102 mm) | 2.2 mm | 1,298 mm | 6 | Vinyl, card and thin sheet |
| 5.62 × 6 in (143 × 152 mm) | 3.4 mm | 1,948 mm | 2 | Any material, including 3 mm wood and acrylic |
| 7.49 × 8 in (190 × 203 mm) | 4.5 mm | 2,597 mm | 1 | Any material, including 3 mm wood and acrylic |
| 11.23 × 12 in (285 × 305 mm) | 6.7 mm | 3,895 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
Pine wreath 
Half wreath 
Half leaf wreath for one side 
Eucalyptus wreath 
Berry wreath 
Olive wreath 
Floral wreath 
Wheat wreath 