Laurel wreath SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
Two laurel branches that rise from a crossed stem and almost meet at the top, with leaves that get smaller as they climb. The award and crest wreath.
This shape is also a part in the shadow box scene maker, where you can stand it in a layered scene and download the sheets.
What is in the file
| Size | 100 × 95 mm (3.94 × 3.73 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 5: 1 outer edge and 4 cut-outs |
| Cut length | 1,083 mm at this size |
| Narrowest part | 2.6 mm at this size |
| Nodes | 302 curve and line segments |
| Symmetry | Mirror |
Measured from the file. PNG: 2,000 × 1,900 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.95 in (25 × 24 mm) | 0.66 mm | 275 mm | 100 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.9 in (51 × 48 mm) | 1.3 mm | 550 mm | 25 | Vinyl, card and thin sheet |
| 3 × 2.84 in (76 × 72 mm) | 2 mm | 825 mm | 12 | Vinyl, card and thin sheet |
| 4 × 3.79 in (102 × 96 mm) | 2.6 mm | 1,100 mm | 6 | Vinyl, card and thin sheet |
| 6 × 5.69 in (152 × 144 mm) | 4 mm | 1,650 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 7.58 in (203 × 193 mm) | 5.3 mm | 2,201 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 11.38 in (305 × 289 mm) | 7.9 mm | 3,301 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.