Mandala wolf face SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
The wolf face cut into windows like leaded glass: a flower on the brow, fans in the cheeks, split ears and drops down the muzzle. Cut it at full size.
What is in the file
| Size | 100 × 96 mm (3.94 × 3.78 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 32: 1 outer edge and 31 cut-outs |
| Cut length | 1,072 mm at this size |
| Narrowest part | 1.9 mm at this size |
| Nodes | 357 curve and line segments |
| Symmetry | Mirror |
Measured from the file. PNG: 2,000 × 1,921 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.96 in (25 × 24 mm) | 0.48 mm | 272 mm | 100 | Too fine for most machines |
| 2 × 1.92 in (51 × 49 mm) | 0.97 mm | 545 mm | 25 | Fine detail: vinyl and paper only, weed with care |
| 3 × 2.88 in (76 × 73 mm) | 1.4 mm | 817 mm | 9 | Vinyl, card and thin sheet |
| 4 × 3.84 in (102 × 97 mm) | 1.9 mm | 1,089 mm | 6 | Vinyl, card and thin sheet |
| 6 × 5.75 in (152 × 146 mm) | 2.9 mm | 1,634 mm | 2 | Vinyl, card and thin sheet |
| 8 × 7.67 in (203 × 195 mm) | 3.9 mm | 2,178 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 11.51 in (305 × 292 mm) | 5.8 mm | 3,267 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.