Mother wolf and pup SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A she-wolf with her head lowered to a pup that sits in front of her looking up, both on a strip of ground that joins them into one piece.
This shape is also a part in the shadow box scene maker, where you can stand it in a layered scene and download the sheets.
What is in the file
| Size | 100 × 48 mm (3.94 × 1.89 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 5: 1 outer edge and 4 cut-outs |
| Cut length | 578 mm at this size |
| Narrowest part | 1 mm at this size |
| Nodes | 299 curve and line segments |
| Also found as | Mama wolf SVG |
Measured from the file. PNG: 2,000 × 998 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.48 in (25 × 12 mm) | 0.25 mm | 147 mm | 170 | Too fine for most machines |
| 2 × 0.96 in (51 × 24 mm) | 0.51 mm | 294 mm | 50 | Fine detail: vinyl and paper only, weed with care |
| 3 × 1.44 in (76 × 36 mm) | 0.76 mm | 440 mm | 21 | Fine detail: vinyl and paper only, weed with care |
| 4 × 1.92 in (102 × 49 mm) | 1 mm | 587 mm | 10 | Vinyl, card and thin sheet |
| 6 × 2.87 in (152 × 73 mm) | 1.5 mm | 881 mm | 3 | Vinyl, card and thin sheet |
| 8 × 3.83 in (203 × 97 mm) | 2 mm | 1,174 mm | 3 | Vinyl, card and thin sheet |
| 12 × 5.75 in (305 × 146 mm) | 3 mm | 1,762 mm | 2 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.