Wolf outline SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A standing wolf drawn as one even line, head up and ears forward, with the fur at its chest and shoulders in the outline. For colouring pages, foil and pen plotters.
What is in the file
| Size | 100 × 75 mm (3.94 × 2.96 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 4: 1 outer edge and 3 cut-outs |
| Cut length | 972 mm at this size |
| Narrowest part | 2.1 mm at this size |
| Nodes | 448 curve and line segments |
Measured from the file. PNG: 2,000 × 1,523 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.75 in (25 × 19 mm) | 0.53 mm | 247 mm | 120 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.5 in (51 × 38 mm) | 1.1 mm | 494 mm | 35 | Vinyl, card and thin sheet |
| 3 × 2.26 in (76 × 57 mm) | 1.6 mm | 741 mm | 12 | Vinyl, card and thin sheet |
| 4 × 3.01 in (102 × 76 mm) | 2.1 mm | 988 mm | 6 | Vinyl, card and thin sheet |
| 6 × 4.51 in (152 × 115 mm) | 3.2 mm | 1,481 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 6.02 in (203 × 153 mm) | 4.3 mm | 1,975 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 9.02 in (305 × 229 mm) | 6.4 mm | 2,963 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.