Free wolf SVG

Howling wolf head SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Howling wolf head, as a solid black shape
Howling wolf head. The preview is the SVG file itself.

A wolf head and neck in profile, muzzle raised and jaws open, with a ragged mane, a closed eye and strokes of fur cut in. Bold enough for a shirt front or a sign.

What is in the file

Size74 × 100 mm (2.93 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut7: 1 outer edge and 6 cut-outs
Cut length609 mm at this size
Narrowest part2.7 mm at this size
Nodes175 curve and line segments

Measured from the file. PNG: 1,506 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.74 × 1 in (19 × 25 mm)0.69 mm155 mm120Fine detail: vinyl and paper only, weed with care
1.49 × 2 in (38 × 51 mm)1.4 mm309 mm35Vinyl, card and thin sheet
2.23 × 3 in (57 × 76 mm)2.1 mm464 mm15Vinyl, card and thin sheet
2.97 × 4 in (75 × 102 mm)2.7 mm619 mm6Vinyl, card and thin sheet
4.46 × 6 in (113 × 152 mm)4.1 mm928 mm2Any material, including 3 mm wood and acrylic
5.94 × 8 in (151 × 203 mm)5.5 mm1,237 mm1Any material, including 3 mm wood and acrylic
8.92 × 12 in (226 × 305 mm)8.2 mm1,856 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More wolf SVG files

← Full moon with a howling wolf All 15 wolves Wolf face →