Geometric wolf head SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A wolf head built from straight lines and flat facets, each edge drawn as an even line, with solid eyes and a solid nose. For foil, engraving, string art patterns and wall art.
What is in the file
| Size | 100 × 95 mm (3.94 × 3.75 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 18: 1 outer edge and 17 cut-outs |
| Cut length | 1,544 mm at this size |
| Narrowest part | 1.9 mm at this size |
| Nodes | 223 curve and line segments |
| Symmetry | Mirror |
Measured from the file. PNG: 2,000 × 1,908 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.95 in (25 × 24 mm) | 0.48 mm | 392 mm | 100 | Too fine for most machines |
| 2 × 1.9 in (51 × 48 mm) | 0.97 mm | 784 mm | 25 | Fine detail: vinyl and paper only, weed with care |
| 3 × 2.86 in (76 × 73 mm) | 1.4 mm | 1,177 mm | 9 | Vinyl, card and thin sheet |
| 4 × 3.81 in (102 × 97 mm) | 1.9 mm | 1,569 mm | 6 | Vinyl, card and thin sheet |
| 6 × 5.71 in (152 × 145 mm) | 2.9 mm | 2,353 mm | 2 | Vinyl, card and thin sheet |
| 8 × 7.62 in (203 × 193 mm) | 3.9 mm | 3,137 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 11.42 in (305 × 290 mm) | 5.8 mm | 4,706 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.