Tribal wings SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
Wings in tattoo style: seven curved blades with sharp points hang from a hooked spine on each side, with three barbs along the top. Bold, with no fine feather lines.
What is in the file
| Size | 100 × 41 mm (3.94 × 1.63 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 3: 1 outer edge and 2 cut-outs |
| Cut length | 819 mm at this size |
| Narrowest part | 2.3 mm at this size |
| Nodes | 318 curve and line segments |
| Symmetry | Mirror |
Measured from the file. PNG: 2,000 × 871 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.41 in (25 × 10 mm) | 0.58 mm | 208 mm | 190 | Fine detail: vinyl and paper only, weed with care |
| 2 × 0.83 in (51 × 21 mm) | 1.2 mm | 416 mm | 55 | Vinyl, card and thin sheet |
| 3 × 1.24 in (76 × 31 mm) | 1.8 mm | 624 mm | 24 | Vinyl, card and thin sheet |
| 4 × 1.65 in (102 × 42 mm) | 2.3 mm | 832 mm | 12 | Vinyl, card and thin sheet |
| 6 × 2.48 in (152 × 63 mm) | 3.5 mm | 1,248 mm | 4 | Any material, including 3 mm wood and acrylic |
| 8 × 3.3 in (203 × 84 mm) | 4.7 mm | 1,664 mm | 3 | Any material, including 3 mm wood and acrylic |
| 12 × 4.96 in (305 × 126 mm) | 7 mm | 2,496 mm | 2 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.