Free wings SVG

Single wing SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Single wing, as a solid black shape
Single wing. The preview is the SVG file itself.

One large wing with thirteen pointed feathers and a row of coverts, drawn as a right-hand wing with its tip up. Mirror it in your cutting software for the other side.

What is in the file

Size99 × 100 mm (3.91 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut4: 1 outer edge and 3 cut-outs
Cut length793 mm at this size
Narrowest part2.5 mm at this size
Nodes265 curve and line segments

Measured from the file. PNG: 1,985 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.99 × 1 in (25 × 25 mm)0.64 mm201 mm100Fine detail: vinyl and paper only, weed with care
1.98 × 2 in (50 × 51 mm)1.3 mm403 mm25Vinyl, card and thin sheet
2.98 × 3 in (76 × 76 mm)1.9 mm604 mm9Vinyl, card and thin sheet
3.97 × 4 in (101 × 102 mm)2.5 mm806 mm4Vinyl, card and thin sheet
5.95 × 6 in (151 × 152 mm)3.8 mm1,209 mm1Any material, including 3 mm wood and acrylic
7.94 × 8 in (202 × 203 mm)5.1 mm1,611 mm1Any material, including 3 mm wood and acrylic
11.9 × 12 in (302 × 305 mm)7.6 mm2,417 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More wings SVG files

← Lowered wings All 10 wings Wings outline →