Free wings SVG

Art deco wings with a blank ring SVG

Art deco wings with a blank ring. The preview is the SVG file itself.

Six straight bars a side step back from a ring in the middle, in the style of a 1930s radiator badge. The ring is left empty for an initial or a small emblem of your own.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 44 mm (3.94 × 1.73 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	2: 1 outer edge and 1 cut-out
Cut length	702 mm at this size
Narrowest part	3.3 mm at this size
Nodes	68 curve and line segments
Symmetry	Mirror

Measured from the file. PNG: 2,000 × 921 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.44 in (25 × 11 mm)	0.84 mm	178 mm	190	Fine detail: vinyl and paper only, weed with care
2 × 0.88 in (51 × 22 mm)	1.7 mm	357 mm	55	Vinyl, card and thin sheet
3 × 1.32 in (76 × 33 mm)	2.5 mm	535 mm	24	Vinyl, card and thin sheet
4 × 1.76 in (102 × 45 mm)	3.4 mm	713 mm	12	Any material, including 3 mm wood and acrylic
6 × 2.63 in (152 × 67 mm)	5 mm	1,070 mm	4	Any material, including 3 mm wood and acrylic
8 × 3.51 in (203 × 89 mm)	6.7 mm	1,426 mm	3	Any material, including 3 mm wood and acrylic
12 × 5.27 in (305 × 134 mm)	10 mm	2,140 mm	2	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More wings SVG files

← Phoenix wing All 10 wings Cross with wings →