Free wings SVG

Wings outline SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Wings outline, drawn as a line
Wings outline. The preview is the SVG file itself.

The spread pair as a line drawing, with the edge of the arm, every covert and every flight feather drawn and all the lines joined. For colouring, foil and engraving.

What is in the file

Size100 × 26 mm (3.94 × 1.04 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut48: 1 outer edge and 47 cut-outs
Cut length1,337 mm at this size
Narrowest part1.3 mm at this size
Nodes588 curve and line segments
SymmetryMirror

Measured from the file. PNG: 2,000 × 583 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.26 in (25 × 7 mm)0.33 mm340 mm260Too fine for most machines
2 × 0.53 in (51 × 13 mm)0.66 mm679 mm80Fine detail: vinyl and paper only, weed with care
3 × 0.79 in (76 × 20 mm)0.99 mm1,019 mm36Fine detail: vinyl and paper only, weed with care
4 × 1.05 in (102 × 27 mm)1.3 mm1,358 mm18Vinyl, card and thin sheet
6 × 1.58 in (152 × 40 mm)2 mm2,038 mm6Vinyl, card and thin sheet
8 × 2.1 in (203 × 53 mm)2.6 mm2,717 mm5Vinyl, card and thin sheet
12 × 3.16 in (305 × 80 mm)4 mm4,075 mm3Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More wings SVG files

← Single wing All 10 wings Tribal wings →