Lowered wings SVG
Wings at rest: the arms arch out from the shoulders and ten long feathers sweep down and back on each side, longest at the tips. A calm pair for the back of a jacket.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 100 × 50 mm (3.94 × 1.98 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 5: 1 outer edge and 4 cut-outs |
| Cut length | 634 mm at this size |
| Narrowest part | 2.3 mm at this size |
| Nodes | 230 curve and line segments |
| Symmetry | Mirror |
Measured from the file. PNG: 2,000 × 1,044 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.5 in (25 × 13 mm) | 0.58 mm | 161 mm | 170 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.01 in (51 × 26 mm) | 1.2 mm | 322 mm | 50 | Vinyl, card and thin sheet |
| 3 × 1.51 in (76 × 38 mm) | 1.8 mm | 483 mm | 21 | Vinyl, card and thin sheet |
| 4 × 2.01 in (102 × 51 mm) | 2.3 mm | 644 mm | 10 | Vinyl, card and thin sheet |
| 6 × 3.02 in (152 × 77 mm) | 3.5 mm | 966 mm | 3 | Any material, including 3 mm wood and acrylic |
| 8 × 4.02 in (203 × 102 mm) | 4.7 mm | 1,288 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 6.04 in (305 × 153 mm) | 7 mm | 1,932 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
Single wing 
Wings outline 
Tribal wings 
Phoenix wing 
Art deco wings with a blank ring 
Cross with wings 
Wings and heart 
Spread eagle-style wings 