Two with a swash underline SVG
“Two” in Pacifico script with a tapering swash swept underneath it, welded to the word where a letter dips down to meet it, or sitting just below it where none does.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 100 × 57 mm (3.94 × 2.22 in), scales to any size |
|---|---|
| Pieces | 3 separate pieces |
| Outlines to cut | 4: 3 outer edges and 1 cut-out |
| Cut length | 672 mm at this size |
| Narrowest part | 4.5 mm at this size |
| Nodes | 238 curve and line segments |
Measured from the file. PNG: 2,000 × 1,163 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.57 in (25 × 14 mm) | 1.1 mm | 171 mm | 150 | Vinyl, card and thin sheet |
| 2 × 1.13 in (51 × 29 mm) | 2.3 mm | 341 mm | 45 | Vinyl, card and thin sheet |
| 3 × 1.7 in (76 × 43 mm) | 3.4 mm | 512 mm | 18 | Any material, including 3 mm wood and acrylic |
| 4 × 2.26 in (102 × 57 mm) | 4.6 mm | 683 mm | 8 | Any material, including 3 mm wood and acrylic |
| 6 × 3.39 in (152 × 86 mm) | 6.9 mm | 1,024 mm | 3 | Any material, including 3 mm wood and acrylic |
| 8 × 4.52 in (203 × 115 mm) | 9.1 mm | 1,366 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 6.78 in (305 × 172 mm) | 14 mm | 2,048 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
Two with stars 
Two outline lettering 
Two stencil plate 
Two with a drop shadow 
Two in Pacifico 
Two in Lobster 
Two in Kaushan Script 
Two in Lilita One 