Free Two SVG

Two in Kaushan Script SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Two in Kaushan Script, as a solid black shape
Two in Kaushan Script. The preview is the SVG file itself.

“Two” set in Kaushan Script, a lively brush script. It leans forward with the uneven edge of a loaded brush, which suits informal signs and shirts.

What is in the file

Size100 × 60 mm (3.94 × 2.35 in), scales to any size
Pieces3 separate pieces
Outlines to cut4: 3 outer edges and 1 cut-out
Cut length629 mm at this size
Narrowest part2.2 mm at this size
Nodes137 curve and line segments

Measured from the file. PNG: 2,000 × 1,225 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.6 in (25 × 15 mm)0.56 mm160 mm150Fine detail: vinyl and paper only, weed with care
2 × 1.19 in (51 × 30 mm)1.1 mm320 mm40Vinyl, card and thin sheet
3 × 1.79 in (76 × 45 mm)1.7 mm479 mm18Vinyl, card and thin sheet
4 × 2.39 in (102 × 61 mm)2.2 mm639 mm8Vinyl, card and thin sheet
6 × 3.58 in (152 × 91 mm)3.4 mm959 mm3Any material, including 3 mm wood and acrylic
8 × 4.78 in (203 × 121 mm)4.5 mm1,278 mm2Any material, including 3 mm wood and acrylic
12 × 7.16 in (305 × 182 mm)6.7 mm1,917 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Two SVG files

← Two in Lobster All 13 Two designs Two in Lilita One →