Two in Alfa Slab One SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Two” set in Alfa Slab One, a very heavy slab serif. Thick strokes and blunt square serifs give it the weight of a poster headline.
What is in the file
| Size | 100 × 34 mm (3.94 × 1.33 in), scales to any size |
|---|---|
| Pieces | 3 separate pieces |
| Outlines to cut | 4: 3 outer edges and 1 cut-out |
| Cut length | 455 mm at this size |
| Narrowest part | 5.7 mm at this size |
| Nodes | 56 curve and line segments |
Measured from the file. PNG: 2,000 × 727 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.34 in (25 × 9 mm) | 1.4 mm | 116 mm | 220 | Vinyl, card and thin sheet |
| 2 × 0.68 in (51 × 17 mm) | 2.9 mm | 231 mm | 65 | Vinyl, card and thin sheet |
| 3 × 1.01 in (76 × 26 mm) | 4.3 mm | 347 mm | 30 | Any material, including 3 mm wood and acrylic |
| 4 × 1.35 in (102 × 34 mm) | 5.8 mm | 462 mm | 14 | Any material, including 3 mm wood and acrylic |
| 6 × 2.03 in (152 × 52 mm) | 8.7 mm | 693 mm | 5 | Any material, including 3 mm wood and acrylic |
| 8 × 2.7 in (203 × 69 mm) | 12 mm | 925 mm | 4 | Any material, including 3 mm wood and acrylic |
| 12 × 4.06 in (305 × 103 mm) | 17 mm | 1,387 mm | 2 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Two SVG files
-
Two in Amatic SC Solid · 3 pieces
-
Two in block capitals Solid · 3 pieces
-
Two with a swash underline Solid · 3 pieces
-
Two with stars Solid · 9 pieces
-
Two outline lettering Outline · 4 pieces
-
Two stencil plate Solid · one piece
-
Two with a drop shadow Layered · 4 pieces
-
Two with a birthday cake Solid · 4 pieces