Two with a drop shadow SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Two” in Pacifico script in two colours: the words, and a thicker copy behind them shifted down and to the right as a shadow. The shadow layer is one solid piece, which makes the whole design easy to place.
What is in the file
| Size | 100 × 48 mm (3.94 × 1.87 in), scales to any size |
|---|---|
| Pieces | 4 separate pieces |
| Outlines to cut | 6: 4 outer edges and 2 cut-outs |
| Cut length | 950 mm at this size |
| Narrowest part | Nothing narrower than 6 mm at this size |
| Nodes | 191 curve and line segments |
| Layers | 2: shadow and words |
Measured from the file. PNG: 2,000 × 990 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.48 in (25 × 12 mm) | Over 1.5 mm | 241 mm | 180 | Vinyl, card and thin sheet |
| 2 × 0.95 in (51 × 24 mm) | Over 3 mm | 483 mm | 50 | Any material, including 3 mm wood and acrylic |
| 3 × 1.42 in (76 × 36 mm) | Over 4.6 mm | 724 mm | 21 | Any material, including 3 mm wood and acrylic |
| 4 × 1.9 in (102 × 48 mm) | Over 6.1 mm | 965 mm | 10 | Any material, including 3 mm wood and acrylic |
| 6 × 2.85 in (152 × 72 mm) | Over 9.1 mm | 1,448 mm | 4 | Any material, including 3 mm wood and acrylic |
| 8 × 3.8 in (203 × 97 mm) | Over 12 mm | 1,930 mm | 3 | Any material, including 3 mm wood and acrylic |
| 12 × 5.7 in (305 × 145 mm) | Over 18 mm | 2,896 mm | 2 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Two SVG files
-
Two with a birthday cake Solid · 4 pieces
-
Two in Pacifico Solid · 2 pieces
-
Two in Lobster Solid · 3 pieces
-
Two in Kaushan Script Solid · 3 pieces
-
Two in Lilita One Solid · 3 pieces
-
Two in Alfa Slab One Solid · 3 pieces
-
Two in Amatic SC Solid · 3 pieces
-
Two in block capitals Solid · 3 pieces
← Two stencil plate All 13 Two designs Two with a birthday cake →