Free Two SVG

Two in Pacifico SVG

Two in Pacifico, as a solid black shape
Two in Pacifico. The preview is the SVG file itself.

“Two” set in Pacifico, a bold brush script. The letters of each word join, as handwriting does, so a word comes off the mat in one piece apart from any dots.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 46 mm (3.94 × 1.81 in), scales to any size
Pieces2 separate pieces
Outlines to cut3: 2 outer edges and 1 cut-out
Cut length496 mm at this size
Narrowest part4.8 mm at this size
Nodes155 curve and line segments

Measured from the file. PNG: 2,000 × 960 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.46 in (25 × 12 mm)1.2 mm126 mm180Vinyl, card and thin sheet
2 × 0.92 in (51 × 23 mm)2.4 mm252 mm50Vinyl, card and thin sheet
3 × 1.38 in (76 × 35 mm)3.7 mm378 mm21Any material, including 3 mm wood and acrylic
4 × 1.84 in (102 × 47 mm)4.9 mm504 mm10Any material, including 3 mm wood and acrylic
6 × 2.75 in (152 × 70 mm)7.3 mm756 mm4Any material, including 3 mm wood and acrylic
8 × 3.67 in (203 × 93 mm)9.8 mm1,008 mm3Any material, including 3 mm wood and acrylic
12 × 5.51 in (305 × 140 mm)15 mm1,512 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Two SVG files

← Two with a drop shadow All 12 Two designs Two in Lobster →