Free Two SVG

Two with stars SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Two with stars, as a solid black shape
Two with stars. The preview is the SVG file itself.

“Two” in Lobster with a row of three stars above the words and three below, the middle one larger. The stars are loose pieces, spaced to the width of the lettering.

What is in the file

Size100 × 77 mm (3.94 × 3.02 in), scales to any size
Pieces9 separate pieces
Outlines to cut10: 9 outer edges and 1 cut-out
Cut length813 mm at this size
Narrowest part2.6 mm at this size
Nodes138 curve and line segments

Measured from the file. PNG: 2,000 × 1,552 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.77 in (25 × 19 mm)0.66 mm207 mm120Fine detail: vinyl and paper only, weed with care
2 × 1.53 in (51 × 39 mm)1.3 mm413 mm35Vinyl, card and thin sheet
3 × 2.3 in (76 × 58 mm)2 mm620 mm12Vinyl, card and thin sheet
4 × 3.07 in (102 × 78 mm)2.6 mm826 mm6Vinyl, card and thin sheet
6 × 4.6 in (152 × 117 mm)4 mm1,239 mm2Any material, including 3 mm wood and acrylic
8 × 6.14 in (203 × 156 mm)5.3 mm1,652 mm1Any material, including 3 mm wood and acrylic
12 × 9.2 in (305 × 234 mm)7.9 mm2,478 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Two SVG files

← Two with a swash underline All 13 Two designs Two outline lettering →