Free trophy SVG

Star trophy SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Star trophy. The preview is the SVG file itself.

A five-pointed star on a short neck and a block base, with a smaller star cut from its middle and an empty plate on the base. For star of the week, dance awards and team mates of the match.

What is in the file

Size	60 × 100 mm (2.35 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	3: 1 outer edge and 2 cut-outs
Cut length	538 mm at this size
Narrowest part	4.4 mm at this size
Nodes	83 curve and line segments
Symmetry	Mirror

Measured from the file. PNG: 1,227 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.6 × 1 in (15 × 25 mm)	1.1 mm	137 mm	150	Vinyl, card and thin sheet
1.2 × 2 in (30 × 51 mm)	2.2 mm	273 mm	40	Vinyl, card and thin sheet
1.79 × 3 in (46 × 76 mm)	3.4 mm	410 mm	18	Any material, including 3 mm wood and acrylic
2.39 × 4 in (61 × 102 mm)	4.5 mm	547 mm	8	Any material, including 3 mm wood and acrylic
3.59 × 6 in (91 × 152 mm)	6.7 mm	820 mm	3	Any material, including 3 mm wood and acrylic
4.78 × 8 in (122 × 203 mm)	8.9 mm	1,093 mm	2	Any material, including 3 mm wood and acrylic
7.18 × 12 in (182 × 305 mm)	13 mm	1,640 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More trophy SVG files

← Trophy outline All 14 trophies Heart trophy →