Free trophy SVG

Trophy outline SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Trophy outline, drawn as a line — Trophy outline. The preview is the SVG file itself.

The cup drawn as an even line a little under 3 mm wide round its whole edge, handles included, and all joined into one piece. For colouring pages, certificates, foil and pen plotters.

What is in the file

Size	88 × 100 mm (3.48 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	4: 1 outer edge and 3 cut-outs
Cut length	865 mm at this size
Narrowest part	2.4 mm at this size
Nodes	225 curve and line segments
Symmetry	Mirror

Measured from the file. PNG: 1,777 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.88 × 1 in (22 × 25 mm)	0.61 mm	220 mm	110	Fine detail: vinyl and paper only, weed with care
1.77 × 2 in (45 × 51 mm)	1.2 mm	439 mm	30	Vinyl, card and thin sheet
2.65 × 3 in (67 × 76 mm)	1.8 mm	659 mm	12	Vinyl, card and thin sheet
3.54 × 4 in (90 × 102 mm)	2.4 mm	879 mm	6	Vinyl, card and thin sheet
5.3 × 6 in (135 × 152 mm)	3.7 mm	1,318 mm	2	Any material, including 3 mm wood and acrylic
7.07 × 8 in (180 × 203 mm)	4.9 mm	1,758 mm	1	Any material, including 3 mm wood and acrylic
10.61 × 12 in (269 × 305 mm)	7.3 mm	2,637 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More trophy SVG files

← Trophy silhouette All 14 trophies Star trophy →