Trophy in an award wreath SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
The cup with its star, set between two laurel branches of nineteen leaves each that cross under its base. One piece, for certificates, team shirts and end-of-season cards.
What is in the file
| Size | 100 × 92 mm (3.94 × 3.62 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 7: 1 outer edge and 6 cut-outs |
| Cut length | 1,400 mm at this size |
| Narrowest part | 1.9 mm at this size |
| Nodes | 456 curve and line segments |
Measured from the file. PNG: 2,000 × 1,846 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.92 in (25 × 23 mm) | 0.48 mm | 356 mm | 100 | Too fine for most machines |
| 2 × 1.84 in (51 × 47 mm) | 0.97 mm | 711 mm | 25 | Fine detail: vinyl and paper only, weed with care |
| 3 × 2.76 in (76 × 70 mm) | 1.4 mm | 1,067 mm | 12 | Vinyl, card and thin sheet |
| 4 × 3.68 in (102 × 93 mm) | 1.9 mm | 1,422 mm | 6 | Vinyl, card and thin sheet |
| 6 × 5.52 in (152 × 140 mm) | 2.9 mm | 2,134 mm | 2 | Vinyl, card and thin sheet |
| 8 × 7.36 in (203 × 187 mm) | 3.9 mm | 2,845 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 11.04 in (305 × 280 mm) | 5.8 mm | 4,267 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More trophy SVG files
-
Trophy with a blank banner Solid · one piece -
Trophy on a podium Solid · one piece -
Trophy badge Solid · one piece -
Award plaque with a blank plate Solid · one piece -
Blank plaque shape for a trophy shelf Solid · one piece -
Layered gold trophy on a blue rosette Layered · 6 pieces -
Trophy cup with a star Solid · one piece -
Simple trophy Solid · one piece
← Tall column trophy All 14 trophies Trophy with a blank banner →