Free trophy SVG

Award plaque with a blank plate SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Award plaque with a blank plate. The preview is the SVG file itself.

A shield-shaped board with a large empty window for the engraving plate, a fine line round it, a star above, a smaller star below and two fixing holes. The trophy for the wall.

What is in the file

Size	82 × 100 mm (3.23 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	10: 1 outer edge and 9 cut-outs
Cut length	957 mm at this size
Narrowest part	4.6 mm at this size
Nodes	127 curve and line segments
Symmetry	Mirror

Measured from the file. PNG: 1,656 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.82 × 1 in (21 × 25 mm)	1.2 mm	243 mm	110	Vinyl, card and thin sheet
1.64 × 2 in (42 × 51 mm)	2.3 mm	486 mm	30	Vinyl, card and thin sheet
2.46 × 3 in (63 × 76 mm)	3.5 mm	729 mm	12	Any material, including 3 mm wood and acrylic
3.28 × 4 in (83 × 102 mm)	4.7 mm	972 mm	6	Any material, including 3 mm wood and acrylic
4.93 × 6 in (125 × 152 mm)	7 mm	1,458 mm	2	Any material, including 3 mm wood and acrylic
6.57 × 8 in (167 × 203 mm)	9.3 mm	1,945 mm	1	Any material, including 3 mm wood and acrylic
9.85 × 12 in (250 × 305 mm)	14 mm	2,917 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More trophy SVG files

← Trophy badge All 14 trophies Blank plaque shape for a trophy shelf →