Free Trick or Teach SVG

Trick or Teach in Pacifico SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Trick or Teach in Pacifico, as a solid black shape
Trick or Teach in Pacifico. The preview is the SVG file itself.

“Trick or Teach” set in Pacifico, a bold brush script, on 2 centred lines. The letters of each word join, as handwriting does, so a word comes off the mat in one piece apart from any dots.

What is in the file

Size100 × 73 mm (3.94 × 2.85 in), scales to any size
Pieces6 separate pieces
Outlines to cut11: 6 outer edges and 5 cut-outs
Cut length926 mm at this size
Narrowest part1.7 mm at this size
Nodes289 curve and line segments

Measured from the file. PNG: 2,000 × 1,471 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.73 in (25 × 18 mm)0.43 mm235 mm130Too fine for most machines
2 × 1.45 in (51 × 37 mm)0.86 mm470 mm35Fine detail: vinyl and paper only, weed with care
3 × 2.17 in (76 × 55 mm)1.3 mm706 mm15Vinyl, card and thin sheet
4 × 2.9 in (102 × 74 mm)1.7 mm941 mm6Vinyl, card and thin sheet
6 × 4.35 in (152 × 110 mm)2.6 mm1,411 mm2Vinyl, card and thin sheet
8 × 5.8 in (203 × 147 mm)3.5 mm1,882 mm2Any material, including 3 mm wood and acrylic
12 × 8.7 in (305 × 221 mm)5.2 mm2,822 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Trick or Teach SVG files

← Trick or Teach with a jack-o’-lantern All 13 Trick or Teach designs Trick or Teach in Lobster →