Trick or Teach with stars SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Trick or Teach” in Lobster with a row of three stars above the words and three below, the middle one larger. The stars are loose pieces, spaced to the width of the lettering.
What is in the file
| Size | 100 × 97 mm (3.94 × 3.81 in), scales to any size |
|---|---|
| Pieces | 13 separate pieces |
| Outlines to cut | 16: 13 outer edges and 3 cut-outs |
| Cut length | 1,139 mm at this size |
| Narrowest part | 1.2 mm at this size |
| Nodes | 290 curve and line segments |
Measured from the file. PNG: 2,000 × 1,940 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.97 in (25 × 25 mm) | 0.3 mm | 289 mm | 100 | Too fine for most machines |
| 2 × 1.94 in (51 × 49 mm) | 0.61 mm | 579 mm | 25 | Fine detail: vinyl and paper only, weed with care |
| 3 × 2.91 in (76 × 74 mm) | 0.91 mm | 868 mm | 9 | Fine detail: vinyl and paper only, weed with care |
| 4 × 3.88 in (102 × 98 mm) | 1.2 mm | 1,157 mm | 4 | Vinyl, card and thin sheet |
| 6 × 5.81 in (152 × 148 mm) | 1.8 mm | 1,736 mm | 2 | Vinyl, card and thin sheet |
| 8 × 7.75 in (203 × 197 mm) | 2.4 mm | 2,314 mm | 1 | Vinyl, card and thin sheet |
| 12 × 11.63 in (305 × 295 mm) | 3.7 mm | 3,472 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Trick or Teach SVG files
-
Trick or Teach outline lettering Outline · 14 pieces
-
Trick or Teach stencil plate Solid · one piece
-
Trick or Teach with a drop shadow Layered · 11 pieces
-
Trick or Teach with a jack-o’-lantern Solid · 11 pieces
-
Trick or Teach in Pacifico Solid · 6 pieces
-
Trick or Teach in Lobster Solid · 7 pieces
-
Trick or Teach in Kaushan Script Solid · 13 pieces
-
Trick or Teach in Lilita One Solid · 13 pieces
← Trick or Teach in script and capitals All 13 Trick or Teach designs Trick or Teach outline lettering →