Free Trick or Teach SVG

Trick or Teach in Lobster SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Trick or Teach in Lobster, as a solid black shape — Trick or Teach in Lobster. The preview is the SVG file itself.

“Trick or Teach” set in Lobster, a bold upright script, on 2 centred lines. Upright and heavy, it stays readable from across a room and weeds easily.

What is in the file

Size	100 × 65 mm (3.94 × 2.55 in), scales to any size
Pieces	7 separate pieces
Outlines to cut	10: 7 outer edges and 3 cut-outs
Cut length	900 mm at this size
Narrowest part	1.2 mm at this size
Nodes	340 curve and line segments

Measured from the file. PNG: 2,000 × 1,321 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.65 in (25 × 16 mm)	0.3 mm	229 mm	140	Too fine for most machines
2 × 1.29 in (51 × 33 mm)	0.61 mm	457 mm	40	Fine detail: vinyl and paper only, weed with care
3 × 1.94 in (76 × 49 mm)	0.91 mm	686 mm	15	Fine detail: vinyl and paper only, weed with care
4 × 2.59 in (102 × 66 mm)	1.2 mm	914 mm	8	Vinyl, card and thin sheet
6 × 3.88 in (152 × 99 mm)	1.8 mm	1,372 mm	2	Vinyl, card and thin sheet
8 × 5.18 in (203 × 131 mm)	2.4 mm	1,829 mm	2	Vinyl, card and thin sheet
12 × 7.76 in (305 × 197 mm)	3.7 mm	2,743 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Trick or Teach SVG files

← Trick or Teach in Pacifico All 12 Trick or Teach designs Trick or Teach in Kaushan Script →