Free Trick or Teach SVG

Trick or Teach in Alfa Slab One SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Trick or Teach in Alfa Slab One, as a solid black shape
Trick or Teach in Alfa Slab One. The preview is the SVG file itself.

“Trick or Teach” set in Alfa Slab One, a very heavy slab serif, on 2 centred lines. Thick strokes and blunt square serifs give it the weight of a poster headline.

What is in the file

Size100 × 43 mm (3.94 × 1.71 in), scales to any size
Pieces13 separate pieces
Outlines to cut16: 13 outer edges and 3 cut-outs
Cut length778 mm at this size
Narrowest part2.2 mm at this size
Nodes210 curve and line segments

Measured from the file. PNG: 2,000 × 912 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.43 in (25 × 11 mm)0.56 mm198 mm190Fine detail: vinyl and paper only, weed with care
2 × 0.87 in (51 × 22 mm)1.1 mm395 mm55Vinyl, card and thin sheet
3 × 1.3 in (76 × 33 mm)1.7 mm593 mm24Vinyl, card and thin sheet
4 × 1.74 in (102 × 44 mm)2.2 mm790 mm12Vinyl, card and thin sheet
6 × 2.6 in (152 × 66 mm)3.4 mm1,186 mm4Any material, including 3 mm wood and acrylic
8 × 3.47 in (203 × 88 mm)4.5 mm1,581 mm3Any material, including 3 mm wood and acrylic
12 × 5.21 in (305 × 132 mm)6.7 mm2,371 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Trick or Teach SVG files

← Trick or Teach in Lilita One All 13 Trick or Teach designs Trick or Teach in Amatic SC →