Free Trick or Teach SVG

Trick or Teach in Amatic SC SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Trick or Teach in Amatic SC, as a solid black shape
Trick or Teach in Amatic SC. The preview is the SVG file itself.

“Trick or Teach” set in Amatic SC, narrow hand-drawn capitals, on 2 centred lines. Tall, thin and slightly uneven, like lettering on a chalkboard; the strokes are thickened so they cut.

What is in the file

Size100 × 87 mm (3.94 × 3.43 in), scales to any size
Pieces12 separate pieces
Outlines to cut16: 12 outer edges and 4 cut-outs
Cut length1,364 mm at this size
Narrowest part1.4 mm at this size
Nodes432 curve and line segments

Measured from the file. PNG: 2,000 × 1,752 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.87 in (25 × 22 mm)0.36 mm346 mm110Too fine for most machines
2 × 1.74 in (51 × 44 mm)0.71 mm693 mm30Fine detail: vinyl and paper only, weed with care
3 × 2.61 in (76 × 66 mm)1.1 mm1,039 mm12Vinyl, card and thin sheet
4 × 3.48 in (102 × 88 mm)1.4 mm1,386 mm6Vinyl, card and thin sheet
6 × 5.23 in (152 × 133 mm)2.1 mm2,079 mm2Vinyl, card and thin sheet
8 × 6.97 in (203 × 177 mm)2.8 mm2,772 mm1Vinyl, card and thin sheet
12 × 10.45 in (305 × 265 mm)4.3 mm4,157 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Trick or Teach SVG files

← Trick or Teach in Alfa Slab One All 13 Trick or Teach designs Trick or Teach in block capitals →