Free tooth SVG

Tooth and toothbrush SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Tooth and toothbrush, as a solid black shape
Tooth and toothbrush. The preview is the SVG file itself.

A tooth with a toothbrush leaning across behind it: the handle shows at the lower left, and the head with its bristles and a curl of paste at the upper right.

What is in the file

Size100 × 100 mm (3.94 × 3.93 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut4: 1 outer edge and 3 cut-outs
Cut length590 mm at this size
Narrowest part1 mm at this size
Nodes130 curve and line segments

Measured from the file. PNG: 2,000 × 1,994 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 1 in (25 × 25 mm)0.25 mm150 mm100Too fine for most machines
2 × 1.99 in (51 × 51 mm)0.51 mm300 mm25Fine detail: vinyl and paper only, weed with care
3 × 2.99 in (76 × 76 mm)0.76 mm450 mm9Fine detail: vinyl and paper only, weed with care
4 × 3.99 in (102 × 101 mm)1 mm599 mm4Vinyl, card and thin sheet
6 × 5.98 in (152 × 152 mm)1.5 mm899 mm1Vinyl, card and thin sheet
8 × 7.98 in (203 × 203 mm)2 mm1,199 mm1Vinyl, card and thin sheet
12 × 11.96 in (305 × 304 mm)3 mm1,798 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More tooth SVG files

← Tooth with a Santa hat All 14 teeth Tooth with a heart →