Free tooth SVG

Tooth with a Santa hat SVG

Tooth with a Santa hat, as a solid black shape — Tooth with a Santa hat. The preview is the SVG file itself.

A smiling tooth in a floppy Santa hat with a fur brim and a bobble. Cut lines set the brim apart from the hat and the tooth, and everything stays one piece.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	68 × 100 mm (2.68 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	9: 1 outer edge and 8 cut-outs
Cut length	645 mm at this size
Narrowest part	3.7 mm at this size
Nodes	92 curve and line segments

Measured from the file. PNG: 1,385 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.68 × 1 in (17 × 25 mm)	0.94 mm	164 mm	130	Fine detail: vinyl and paper only, weed with care
1.36 × 2 in (35 × 51 mm)	1.9 mm	328 mm	35	Vinyl, card and thin sheet
2.04 × 3 in (52 × 76 mm)	2.8 mm	491 mm	15	Vinyl, card and thin sheet
2.72 × 4 in (69 × 102 mm)	3.8 mm	655 mm	8	Any material, including 3 mm wood and acrylic
4.08 × 6 in (104 × 152 mm)	5.6 mm	983 mm	2	Any material, including 3 mm wood and acrylic
5.44 × 8 in (138 × 203 mm)	7.5 mm	1,311 mm	2	Any material, including 3 mm wood and acrylic
8.16 × 12 in (207 × 305 mm)	11 mm	1,966 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More tooth SVG files

← Tooth with a bow All 14 teeth Tooth and toothbrush →