Free tooth SVG

Tooth with braces SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Tooth with braces, as a solid black shape
Tooth with braces. The preview is the SVG file itself.

A tooth wearing one bracket of a brace, with the wire running through it and out past both sides. For the day the braces go on, and the better day they come off.

What is in the file

Size100 × 86 mm (3.94 × 3.39 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut5: 1 outer edge and 4 cut-outs
Cut length728 mm at this size
Narrowest part1.8 mm at this size
Nodes86 curve and line segments
SymmetryMirror

Measured from the file. PNG: 2,000 × 1,731 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.86 in (25 × 22 mm)0.46 mm185 mm110Too fine for most machines
2 × 1.72 in (51 × 44 mm)0.91 mm370 mm30Fine detail: vinyl and paper only, weed with care
3 × 2.58 in (76 × 66 mm)1.4 mm555 mm12Vinyl, card and thin sheet
4 × 3.44 in (102 × 87 mm)1.8 mm740 mm6Vinyl, card and thin sheet
6 × 5.16 in (152 × 131 mm)2.7 mm1,109 mm2Vinyl, card and thin sheet
8 × 6.88 in (203 × 175 mm)3.7 mm1,479 mm1Any material, including 3 mm wood and acrylic
12 × 10.32 in (305 × 262 mm)5.5 mm2,219 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More tooth SVG files

← Molar tooth with long roots All 14 teeth Tooth with a shine →