Free tooth SVG

Tooth outline SVG

Tooth outline, drawn as a line — Tooth outline. The preview is the SVG file itself.

The tooth as a single even line, open in the middle. For colouring pages, foil, engraving and pen plotters, or as a border for a child’s tooth chart.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	89 × 100 mm (3.5 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	2: 1 outer edge and 1 cut-out
Cut length	738 mm at this size
Narrowest part	3.4 mm at this size
Nodes	92 curve and line segments
Symmetry	Mirror

Measured from the file. PNG: 1,788 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.89 × 1 in (23 × 25 mm)	0.86 mm	187 mm	110	Fine detail: vinyl and paper only, weed with care
1.78 × 2 in (45 × 51 mm)	1.7 mm	375 mm	30	Vinyl, card and thin sheet
2.67 × 3 in (68 × 76 mm)	2.6 mm	562 mm	12	Vinyl, card and thin sheet
3.56 × 4 in (90 × 102 mm)	3.5 mm	750 mm	6	Any material, including 3 mm wood and acrylic
5.34 × 6 in (136 × 152 mm)	5.2 mm	1,125 mm	2	Any material, including 3 mm wood and acrylic
7.12 × 8 in (181 × 203 mm)	6.9 mm	1,500 mm	1	Any material, including 3 mm wood and acrylic
10.68 × 12 in (271 × 305 mm)	10 mm	2,249 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More tooth SVG files

← Tooth with a shine All 14 teeth Cute tooth with a face →