Free tombstone SVG

Three tombstones in a row SVG

Three tombstones in a row, as a solid black shape — Three tombstones in a row. The preview is the SVG file itself.

A round stone, a cross and a pointed stone leaning this way and that on one strip of turf, welded where they overlap. For a mantel banner, a cake topper or the foot of a Halloween sign.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 66 mm (3.94 × 2.59 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	3: 1 outer edge and 2 cut-outs
Cut length	635 mm at this size
Narrowest part	2.9 mm at this size
Nodes	191 curve and line segments

Measured from the file. PNG: 2,000 × 1,344 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.66 in (25 × 17 mm)	0.74 mm	161 mm	140	Fine detail: vinyl and paper only, weed with care
2 × 1.32 in (51 × 33 mm)	1.5 mm	323 mm	40	Vinyl, card and thin sheet
3 × 1.98 in (76 × 50 mm)	2.2 mm	484 mm	15	Vinyl, card and thin sheet
4 × 2.64 in (102 × 67 mm)	2.9 mm	645 mm	8	Vinyl, card and thin sheet
6 × 3.95 in (152 × 100 mm)	4.4 mm	968 mm	2	Any material, including 3 mm wood and acrylic
8 × 5.27 in (203 × 134 mm)	5.9 mm	1,290 mm	2	Any material, including 3 mm wood and acrylic
12 × 7.91 in (305 × 201 mm)	8.8 mm	1,935 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More tombstone SVG files

← Tombstone with a skull All 13 tombstones Graveyard with tombstones and a tree →