Tombstone with a skull SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A shouldered tombstone carved with a skull: two slanting sockets, a nose and a row of four teeth, with a short line under it. The carving is cut out, so it glows when lit from behind.
What is in the file
| Size | 80 × 100 mm (3.13 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 9: 1 outer edge and 8 cut-outs |
| Cut length | 614 mm at this size |
| Narrowest part | 1.9 mm at this size |
| Nodes | 127 curve and line segments |
Measured from the file. PNG: 1,608 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.8 × 1 in (20 × 25 mm) | 0.48 mm | 156 mm | 120 | Too fine for most machines |
| 1.59 × 2 in (40 × 51 mm) | 0.97 mm | 312 mm | 30 | Fine detail: vinyl and paper only, weed with care |
| 2.39 × 3 in (61 × 76 mm) | 1.4 mm | 468 mm | 12 | Vinyl, card and thin sheet |
| 3.18 × 4 in (81 × 102 mm) | 1.9 mm | 624 mm | 6 | Vinyl, card and thin sheet |
| 4.78 × 6 in (121 × 152 mm) | 2.9 mm | 936 mm | 2 | Vinyl, card and thin sheet |
| 6.37 × 8 in (162 × 203 mm) | 3.9 mm | 1,248 mm | 1 | Any material, including 3 mm wood and acrylic |
| 9.55 × 12 in (243 × 305 mm) | 5.8 mm | 1,871 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More tombstone SVG files
-
Three tombstones in a row Solid · one piece
-
Graveyard with tombstones and a tree Solid · one piece
-
Tombstone with a raven Solid · one piece
-
Tombstone with a ghost Solid · one piece
-
Tombstone with a hand from the grave Solid · one piece
-
Tombstone with a cobweb and a spider Solid · one piece
-
Tombstone with a broken heart Solid · one piece
-
Tombstone frame for a name Solid · one piece
← Gothic tombstone with a pointed top All 13 tombstones Three tombstones in a row →