Free tombstone SVG

Tombstone with a raven SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Tombstone with a raven, as a solid black shape
Tombstone with a raven. The preview is the SVG file itself.

A raven perched on top of a round tombstone, looking to one side, with the border line cut into the stone below. Bird and stone are one piece, for Halloween cards and gothic prints.

What is in the file

Size62 × 100 mm (2.43 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut6: 1 outer edge and 5 cut-outs
Cut length654 mm at this size
Narrowest part1.3 mm at this size
Nodes154 curve and line segments

Measured from the file. PNG: 1,263 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.62 × 1 in (16 × 25 mm)0.33 mm166 mm140Too fine for most machines
1.23 × 2 in (31 × 51 mm)0.66 mm332 mm40Fine detail: vinyl and paper only, weed with care
1.85 × 3 in (47 × 76 mm)0.99 mm498 mm15Fine detail: vinyl and paper only, weed with care
2.47 × 4 in (63 × 102 mm)1.3 mm664 mm8Vinyl, card and thin sheet
3.7 × 6 in (94 × 152 mm)2 mm997 mm3Vinyl, card and thin sheet
4.94 × 8 in (125 × 203 mm)2.6 mm1,329 mm2Vinyl, card and thin sheet
7.4 × 12 in (188 × 305 mm)4 mm1,993 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More tombstone SVG files

← Graveyard with tombstones and a tree All 13 tombstones Tombstone with a ghost →