Free tombstone SVG

Tombstone with a broken heart SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Tombstone with a broken heart, as a solid black shape
Tombstone with a broken heart. The preview is the SVG file itself.

A round tombstone with a heart cut into its face and a jagged crack splitting the heart in two. For anti-Valentine cards, gothic weddings and anyone whose love is undying.

What is in the file

Size78 × 100 mm (3.05 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut4: 1 outer edge and 3 cut-outs
Cut length533 mm at this size
Narrowest part3.3 mm at this size
Nodes78 curve and line segments

Measured from the file. PNG: 1,567 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.78 × 1 in (20 × 25 mm)0.84 mm135 mm120Fine detail: vinyl and paper only, weed with care
1.55 × 2 in (39 × 51 mm)1.7 mm271 mm30Vinyl, card and thin sheet
2.32 × 3 in (59 × 76 mm)2.5 mm406 mm12Vinyl, card and thin sheet
3.1 × 4 in (79 × 102 mm)3.4 mm542 mm6Any material, including 3 mm wood and acrylic
4.65 × 6 in (118 × 152 mm)5 mm812 mm2Any material, including 3 mm wood and acrylic
6.2 × 8 in (157 × 203 mm)6.7 mm1,083 mm1Any material, including 3 mm wood and acrylic
9.3 × 12 in (236 × 305 mm)10 mm1,625 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More tombstone SVG files

← Tombstone with a cobweb and a spider All 13 tombstones Tombstone frame for a name →