Free surfboard SVG

Surfboard behind a breaking wave SVG

Surfboard behind a breaking wave, as a solid black shape
Surfboard behind a breaking wave. The preview is the SVG file itself.

A board standing behind a curling wave whose lip throws over to the right, with two lines of water running up the face. One piece, for surf shop signs, beach bags and camper doors.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 89 mm (3.94 × 3.52 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut9: 1 outer edge and 8 cut-outs
Cut length809 mm at this size
Narrowest part2.3 mm at this size
Nodes112 curve and line segments

Measured from the file. PNG: 2,000 × 1,796 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.89 in (25 × 23 mm)0.58 mm205 mm110Fine detail: vinyl and paper only, weed with care
2 × 1.79 in (51 × 45 mm)1.2 mm411 mm30Vinyl, card and thin sheet
3 × 2.68 in (76 × 68 mm)1.8 mm616 mm12Vinyl, card and thin sheet
4 × 3.58 in (102 × 91 mm)2.3 mm822 mm6Vinyl, card and thin sheet
6 × 5.36 in (152 × 136 mm)3.5 mm1,233 mm2Any material, including 3 mm wood and acrylic
8 × 7.15 in (203 × 182 mm)4.7 mm1,644 mm1Any material, including 3 mm wood and acrylic
12 × 10.73 in (305 × 272 mm)7 mm2,466 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More surfboard SVG files

← Three surfboards standing in the sand All 15 surfboards Surfboard at sunset in a ring →