Free surfboard SVG

Surfboard name sign SVG

Surfboard name sign, as a solid black shape — Surfboard name sign. The preview is the SVG file itself.

A wide longboard lying level with a pair of bands at each end and a small flower by the nose, leaving the whole middle blank for a family name, a house name or a welcome.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 35 mm (3.94 × 1.39 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	10: 1 outer edge and 9 cut-outs
Cut length	543 mm at this size
Narrowest part	1.7 mm at this size
Nodes	106 curve and line segments

Measured from the file. PNG: 2,000 × 758 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.35 in (25 × 9 mm)	0.43 mm	138 mm	220	Too fine for most machines
2 × 0.71 in (51 × 18 mm)	0.86 mm	276 mm	65	Fine detail: vinyl and paper only, weed with care
3 × 1.06 in (76 × 27 mm)	1.3 mm	414 mm	27	Vinyl, card and thin sheet
4 × 1.42 in (102 × 36 mm)	1.7 mm	552 mm	14	Vinyl, card and thin sheet
6 × 2.12 in (152 × 54 mm)	2.6 mm	828 mm	5	Vinyl, card and thin sheet
8 × 2.83 in (203 × 72 mm)	3.5 mm	1,103 mm	4	Any material, including 3 mm wood and acrylic
12 × 4.25 in (305 × 108 mm)	5.2 mm	1,655 mm	2	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More surfboard SVG files

← Surfboard at sunset in a ring All 15 surfboards Surfer with a surfboard →