Surfboard outline SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A longboard as an even line with its stringer down the middle and a pair of bands near the nose and the tail. The same on both sides. For colouring, foil and pen plotters.
What is in the file
| Size | 26 × 100 mm (1.02 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 11: 1 outer edge and 10 cut-outs |
| Cut length | 744 mm at this size |
| Narrowest part | 1.8 mm at this size |
| Nodes | 74 curve and line segments |
| Symmetry | Mirror |
Measured from the file. PNG: 577 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.26 × 1 in (7 × 25 mm) | 0.46 mm | 189 mm | 260 | Too fine for most machines |
| 0.52 × 2 in (13 × 51 mm) | 0.91 mm | 378 mm | 80 | Fine detail: vinyl and paper only, weed with care |
| 0.78 × 3 in (20 × 76 mm) | 1.4 mm | 567 mm | 36 | Vinyl, card and thin sheet |
| 1.04 × 4 in (26 × 102 mm) | 1.8 mm | 756 mm | 18 | Vinyl, card and thin sheet |
| 1.56 × 6 in (40 × 152 mm) | 2.7 mm | 1,134 mm | 6 | Vinyl, card and thin sheet |
| 2.08 × 8 in (53 × 203 mm) | 3.7 mm | 1,512 mm | 5 | Any material, including 3 mm wood and acrylic |
| 3.12 × 12 in (79 × 305 mm) | 5.5 mm | 2,268 mm | 3 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More surfboard SVG files
-
Retro surf board with stripes Solid · one piece
-
Surfboard with hibiscus flowers Solid · one piece
-
Fish surfboard with a bite out of the rail Solid · one piece
-
Two crossed surfboards Solid · one piece
-
Three surfboards standing in the sand Solid · one piece
-
Surfboard behind a breaking wave Solid · one piece
-
Surfboard at sunset in a ring Solid · one piece
-
Surfboard name sign Solid · one piece
← Surfboard silhouette standing in sand All 15 surfboards Retro surf board with stripes →